Auto-darkening helmet KWX73® (1/1/1/2)
Code: KWX73K
_en.png?678531f8)
Related products
Product detailed description
Main features
- This helmet defines a new standard in optical quality and performance in its class on the market.
- Self-dimming filter in specification 1/1/1/2 according to EN379 as the essential and most important parameter for the protection of your eyes. (See EN 379 - Eye protection - Automatic welding filters, figure below).
- When selecting or evaluating an auto-Darkening helmet, always compare these parameters in particular, which determine the optical quality of the filter, i.e. the most important thing in protecting your eyes during welding itself.
- Get the best goods with the best features and utility value, excellent quality at the best prices - that's our strategy, that's KOWAX.
- Field of view size: 96 x 53 mm.
- 4 optical sensors.
- Permanent UV/IR protection (ultraviolet and infrared light spectrum) aperture 16 DIN.
- Aperture with bright filter 3 .5 DIN.
- Continuously variable aperture with darkened filter (during welding) 8-13 DIN, externally controlled by potentiometer.
- Reliable arc detection from 5 [A] (also in pulse ).
- The filter is powered by solar cell + replaceable lithium battery CR2450.
- The self-dimming filter is equipped with an LED low battery indicator to replace the batteries when it lights up.
- Delay setting, so you can set how long after the arc is extinguished the filter will brighten again (up to aperture 3.5) to compensate for any residual brightness the beam/weld may produce. This time can be infinitely adjusted from 0.1~1s by an internal potentiometer.
- The darkening rate after arc start-up is 0.06 ms.
- Switching off/on - automatic.
- Functions: grinding (internal switch).
- Suitable for: MMA (DC&AC); TIG (DC,DC Pulse);TIG AC (Pulse), Excellent for low current TIG St.; MIG/MAG; MIG/MAG Pulse; Plasma Cut./Weld.; TIG ?5 [A]/DC; ?5 [A]/AC.
- Arched front cover film - provides better spatter and radiation reflection as well as
air gap between the cover sheet and the self-dimming filter for better circulation
air in front of the filter. - Front cover sheet with seal - this is very essential - along the unsealed cover sheet, fumes and debris can enter the helmet to the filter.
- Operating temperature from -10°C ~ +55°C - best in class values on the market.
- Weight 440g - the lowest weight in its class on the market.
Accessories:
- Magnifying glasses (1.5; 2; 2.75 diopters) - MUST BE PURCHASED SELF-PURCHASED
- 1pc spare front cover foil included
- Czech manual included
- Warranty card included
|
Optical grade: |
1 / 1 / 1 / 2 |
|
Field of view: |
96 x 53mm ( 3.78 "x2.09") |
|
Filter cartridge size: |
110 x 90 x 9mm (4.33" x 3.54" x 0.35") |
|
Number of sensors: |
4 |
|
Aperture Brightened: |
DIN 3.5 |
|
Aperture: |
Variable DIN 9 ~ 13 |
|
Aperture control: |
External, variable |
|
On/Off: |
With GAS automatic |
|
Sensitivity setting: |
Adjustable internally with potentiometer |
|
UV/IR protection: |
Up to DIN16 aperture permanently |
|
Power source: |
Solar cell + 1xCR2450 replaceable lithium battery |
|
Low battery indicator |
YES |
|
Darkening speed: |
1 /16,000 sec. from light to dark |
|
Delay (dark to light): |
0.1~1.0s adjustable internally by potentiometer |
|
Low current TIG welding: |
≥5 [ A] (DC); ≥5 [A] (AC) |
|
Grinding： |
YES |
|
TEST |
YES |
|
Working temperature: |
-10°C ~ +55°C（14°F ~ 131°F） |
|
Storage temperature: |
-20°C ~ +70°C（- 4°F ~ 158°F） |
|
Helmet material: |
High impact resistant Nylon |
|
Total weight: |
440g |
|
Application Range: |
St.electrode wrapping (SMAW-MMA); TIG DC/AC, TIG DC Pulse; TIG AC Pulse, MIG/MAG/CO2; MIG/MAG Pulse; Plasma cutting (PAC); Plasma welding (PAW); Grinding |
|
Certified: |
CE, ANSI Z87.1, CSA Z94.3, AS/NZS 1338.1 |
Additional parameters
| Category: | Hobby helmets |
|---|---|
| Warranty: | 2 years |
| Weight: | 1.004 kg |
| EAN: | 7453141647260 |
| Model: | KWX73k |
| Vhodná pro metody: | TIG / MIG / MMA |
| Optická třída EN379: | 1/1/1/2 |
| Rozměr zorného pole: | 96x53 |
| Rozsah clony DIN: | 5-8 / 9-13 |
| Prodleva před rozjasněním: | 0,1 - 1 |
| Solární panel: | ANO |
| Celkové rozměry stmívací kazety: | 110x90x9 |
| Počet senzorů: | 4 |
| Ochrana pře UV/IR zářením: | DIN 16 |
| Rychlost zatmavení: | 0,06 |
| Hmotnost: | 0,44 |
| Režim broušení: | ANO |
| Indikátor stavu baterie: | ANO |
| Pracovní teplota: | -10°C / +55°C |
| Zapnutí: | Plně automatické |
| Materiál: | Nylon |
| Clona při rozjasnění DIN: | 3,5 |
| Citlivost: | Plynule nastavitelná |
| The item has been sold out… | |
Be the first who will post an article to this item!
The owner of the brand KOWAX® is the company SVARMETAL s.r.o., which is known in northern Moravia (originally Skotnice, now Příbor-Nový Jičín district) for decades as a seller of welding equipment and joining materials. The company's origins date back to the mid-nineties of the last century (at that time it was still a private individual).
Who wouldn't know the original and now legendary: "Screws, nails, nuts SVARMETAL Skotnice."
Our motto is stock availability, stock availability, stock availability, professionalism and a family approach to the customer.
With us, absolutely everyone can choose and, above all, at the best prices. In addition, shipping is free for orders over CZK 5,000. You no longer have to go to crowded stores, shop in peace from the comfort of your home.
Shopping with us is fun!
Thank you and we look forward to your purchase either here in the e-shop or physically with us in Příbor (Czech Republic).
KOWAX® commitment to customers:
- a complete portfolio of certified products
- the best quality and value of products worldwide
- excellent availability with fast delivery
- production in modern facilities according to strict criteria
- development, innovative solutions and experience since 2006
- fully professional expert service and technical support.